All All around the Farm: Mid-March 2016



Trailer Stake pocket pipe rollers

Put in four or 5 of these rollers in the stake pockets down the duration of a trailer, and it turns into substantially less complicated to unload or maneuver 30-in addition-foot-extended pieces of pipe into place for cutting. Just roll them off the trailer, onto the rollers, and then slide them down towards the chop saw, band noticed, or torch for slicing to desired length. (Shown at ideal.)    

Ryan Njos | Rhame, North Dakota  

bag it with a huge trash receptacle

Needing some extra garbage room, I put to use resources I experienced on hand. 1st, I lower the prime out of an vacant fertilizer tote. Then, I place 1 of all those 2-ton nylon bulk feed luggage into the container. Next, I tied the 4 straps of the bag to the corners of the tote. Now I have a moveable trash can. To vacant, I just seize the 4 straps with a forklift or a tractor equipped with forks. The bag can be reused or changed with a new one.  

David Stahl | White, South Dakota

custom cleanup tool tackles fencerows     

I welded 10-inch lengths of rebar on to a area of metal bar that I connect to the pallet mover used with my tractor loader. This attachment is very good and strong, and it features as a seriously superior cleanup resource to use on our fencerows, primarily soon after the creek has overflowed. (Demonstrated at remaining.)   

Stan Granzow | Eldora, Iowa

rapid hookup saves time at feeding

I constructed this feed bunk force-blade out of discarded street grader blades and iron from aged tillage tools. Rather of acquiring to get out of the wheel loader to hook up a distinctive attachment, I built a box that clamps into a grapple bucket. The box is welded to the V-blade about 4 inches off the floor. This makes it effortless to pick up and press feed again shut to the bunks – whilst feed is mixing in the feed wagon. I can go up one particular feed bunk and down yet another in possibly route. (Revealed at still left.)       

Doug Braaksma | Manhattan, Montana            

a tiny work, and you have a good PUNCH  

Ratchet wrenches generally end up stripped or damaged, and it appears they are often still left lying about the store. I have identified that with the ratchet stop cut off, the hand tool tends to make a wonderful (and totally free) punch. In simple fact, this type of punch will work a great deal better than the types designed for this goal. Of class, sporting eye protection is vital when I use a punch or everything else I strike with a hammer.            

Allen Kleinsasser | Rosholt, South Dakota

shop-developed engine stands

When the rear conclusion of my tractor locked up all through planting time, I did not want to have to acquire highly-priced adjustable stands. So I constructed my very own tailor made pair.    I employed 2-inch sq. tubing for the body and heavyweight, significant-responsibility casters for mobility. Then, I fabricated two ratchet binders to the frame and mounted plates for mounting to the tractor body. The ratchet binders aid with peak adjustment when placing the tractor again with each other. (Shown at left.)        

Kyle Goist | Navarre, Ohio

toolbox stays cleaner with a area for chains  

In the earlier, the place in my utility box in which I saved muddy and wet chains made use of for pulling out products experienced turned into a huge, muddy mess. Now, I very first set them in a used rubber tub and then set the tub into my utility box. It is straightforward to cleanse out when desired. No extra working with mud, drinking water, and rust stains in my toolbox.    

Shawn Wipf | Scotland, South Dakota  

Leave a Reply

Your email address will not be published. Required fields are marked *